The DRYMAT® drying system
DRYMAT® dries the building fabric down to the cellar floor, even with high moisture loads - scientifically recognized and ÖNORM tested.
Homepage › Drying system
Dehumidification of buildings
The DRYMAT® system is a proven electrophysical drying method. Haustrocknung.ch offers this system exclusively in Switzerland with its extended function. Dhat means that, especially in the case of high moisture loads, we work in addition to the Control unit with electrodes made of titanium, which are inserted into the masonry.
All components of the extended function are made of corrosion-resistant titanium and thus designed for decades of application safety. This procedure is recognized by building science (in accordance with ÖNORM 3355-2), highly effective and risk-free for people and building fabric and suitable for listed buildings.
Exemplary application for the DRYMAT® system: electrophysical drying down to the basement floor.
The advantages at a glance
- High drying effect: walls and basement floors are dehumidified
- Minimally invasive: only slitting and drilling work, system invisible after plastering
- Reduce heating costs: dehumidification improves the insulation value of the wall
- Inexpensive: installation as well as operation of the system are budget-friendly
- Healthy living atmosphere: harmful fungal spores are deprived of their basis
- More well-being: Goodbye musty, moldy odors, hello great indoor climate
- Environmentally friendly: no chemical substances, no solvent evaporation
- In compliance with monument protection regulations: installation does not interfere with the building's statics
Reverse polarity eliminated Humidity
Due to the capillary suction stress, an excess of soil moisture can rise in walls or partitions, causing them to suffer damage. The DRYMAT® system counteracts these suction forces with the functional extension.
The plus or minus polarized electrodes embedded in the wall have an effect. This actively prevents the moisture from rising. Result: The wall slowly but steadily becomes dry - and stays that way.
How does the DRYMAT® system dry damp walls?
Unobtrusive system, striking drying performance
Our complete DRYMAT® system with function extension consists of a control unit and the extension components (electrodes, screws, cables) made of titanium. The control unit is mounted on the wall and connected to the power supply (230 V). The installation of the extension is connected with few drilling and slitting works in the masonry. After applying the electrodes and laying the cables, the wall is plastered so that nothing is visible except the control unit.
The DRYMAT® plant is adjusted to the respective conditions and requirements. On request, we periodically monitor the drying process and readjust if necessary. Upon request, our customers are periodically and precisely informed about the moisture reduction in the building structure. The installation in an average sized EFH takes 3 to 5 working days.
It works - guaranteed
DRYMAT® works according to recognized scientific principles, which are laid down in ÖNORM 3355-2. This standard is binding throughout Europe under EU law. DRYMAT® is also certified according to EurAS Cert ISO 9001.
State-of-the-art technology is used in the DRYMAT® control unit. Each individual assembly is manufactured to the highest DIN quality level. This is why we offer a 10-year guarantee on the installed DRYMAT® system in Switzerland.
Contact us without obligation
We offer our services throughout Switzerland. Do you have any further questions or may we prepare an offer for you?
Get in touch with us without obligation. We look forward to your inquiry!
Get in touch with us without obligation. We look forward to your inquiry!
Tobias Bayer
Managing Director